Kart Care
Kart Care products have been specifically developed for karting. By providing easy and safe maintenance for karting engines and accessories, Kart Care can improve performance and the associated costs for the kart racer. The Extreme and Cool-Run products are now widely accepted as the best chain lubricants on the market - they save chains and reduce breakages in races.
Kart Care products are used by kart teams and drivers throughout Europe and all over the World.
Kart Care are one of the official sponsors of the Rotax Euro Challenge and Rotax Max World Finals.
 |
Ancorr is a penetrating oil that loosens nuts, bolts and seized metal parts in seconds. The anti corrosive inhabitants prevent further oxidation and corrosion.
|
 |
Cool-Run is the new generation kart racing chain lubricant. Formulated with an advanced penetrating agent which ensures the lubricant reaches through the links and give 100% protection and lubrication, safe on plastics and rubber, this is the ultimate lubricant for chains with or without o-rings.
|
 |
Superior chain lubrication for 60cc-100cc karting classes. Extreme is manufactured with extra slip, which has been proven to give these classes up to 2/10ths on lap times. For best results, spray inside of chain 3 minutes before practice or race sessions. This is sufficient time for the lubricant to penetrate the link and settle.
|
 |
Special ball bearing and ball joint lubricant. Lubin 12 is a durable dressing for lubrication of moving parts in hostile racing conditions. It provides complete lubrication for open and closed axle bearings, ball joints, stub axle and front wheel bearings. The same protection will occur in excess wet and dry conditions. Lubin 12 will minimise friction and give maximum speed during a normal race or practice session, application of Lubin 12 is recommended before each race commences.
500 ml aerosol can |
 |
One shot is a unique blend of carefully selected modern solvents for the quick and effective clean up of all kart carburettors, both internally and externally for a better performance. One Shot has a fast cleaning power with a slow drying time both of which will ensure the removal of dry petrol/oil mix and gum. Safe on all gaskets and membranes it has been thoroughly tested and approved by the worlds leading kart racers/mechanics.
500 ml aerosol cans |
 |
This unique formula repels water and moisture from electric parts in all wet weather conditions. With added ACA (anti corrosive agent) it will give maximum protection to all metal parts from corrosion during wet weather racing or storage. Pay special attention to the spark plug, ignition lead and coil, it is recommended to spray all these parts generously in wet weather conditions.
|
 |
Shield is a water repellant which will increase visibility whilst racing in extreme wet conditions. For exterior use on a helmet visor. Will also protect the visor against dust. Pour a small amount onto a clean cloth and apply to the outside surface of the visor and polish off. Not suitable for coated visors.50ml pocket size. |
 |
The ultimate in kart degreasers. Speed Clean will successfully remove chain lube, debris and dirt from pods, nose cones and spoilers. For the corporative market spray all over chassis and plastics, wait for a few minutes and pressure wash off with either hot or cold water for fantastic results. Contains anti corrosive agents to protect metal parts.
500 ml aerosol can
|
 |
Brake cleaner removes oil and dirt effectively from brake discs and pads. It's ability to penetrate the brake pads deep into the pores gives a clear advantage over other similiar products. Fast drying and leaving absolutely no film is another benefit Kart Care's client appreciate. Stop is also effective on degreasing bearings, engines, axles, sprockets, chains, chassis and dry clutches affected by chain lubrication (Rotax Max).
500 ml aerosol can
|
 |
Supa Glaze helmet polish, this new advanced formula will protect unpainted and painted helmets alike. Supa Glaze has been developed for kart racing and forms a hard durable shine, long lasting in both rain and sunshine, Before use shake can well, spray either direct onto helmet or on to a soft cloth, rub all over the helmet and let it work for a few minutes, polish off with a soft cloth.
|
 |
Inside helmet foam sanitiser, developed to clean away dirt, debris and sweat from helmet lining. Simple to use formulation, spray on and leave for one to two minutes, wipe out helmet with a damp clean cloth, repeat procedure until helmet is clean. Fresh has been allergy tested and is manufactured with the mildest skin care products. It is recommended to clean inside of helmet after race or practice meeting in order for lining to be giving sufficient time for drying.
|